ES9C
High-definition wide angle camera
4X digital zoom
Inbuilt with microphone
Supports the function of video while charging
Supports high-capacity T-Flash Card
Fill-in lamp camera function
Supports moving detection photogaraph function
Product Specs:
1Sensing element:COMS Wafer
2Lens:Wide angle,120°
3Focus range:12cm-infinite
4Screen:2.7LTOS TFT LCD
5Picture:1M,3M,5M,8M
6Video format:AVI
7Shutter:Electronic
8Connector:USB2.0
9Battery:400mAh
10Dimensions:90*53*13mm
Accessories:
1*User manual
1*USB cable
1*USB charger(built-in 12V to 5V adapter)
Attention:
1Please insert the TF card to the DVR before recording.
2Please supply the power by the USB car charger, the car charger has the adapter that transfer 12V to 5V;
if the output voltage is more than 5V, the DVR will be burned down.
I.Car Camera Feature Diagram
1.Display Screen 2Page Up 3Page Down 4Power On/Off/Menu 5Mode 6OK
7Phone Answer Key / Power On/Off 8Bluetooth Indicator 9On-Board Indicator 10Speaker
11Fastener 12TV Out 13Reset 14USB Port 15TF Card Slot 16Camera
IIFeatures & Operations
Installation: This digital video camera is easy to installJust open the fastener and buckle
it onto your rearview mirror,then connect the car charger to the cigarette lighter and the
USB port to the cameraAnd the wires could be hidden in the car.
Charging: Aby connecting it to the on-board USB charger
Bby connecting it to the power cord: the camera automatically starts recording when the car is started,
and it automatically turns off and saves the video file recorded when its power is cut off for 15 second.
(Note: Use only on-board power supply with an output of 5V/1A.)
3 Recording Mode: The camera automatically enters recording mode when you press
(On/Off) or connect it to the on-board USB charger(Please insert TF card first)
and files are automatically saved to the TF cardThe blue indicator light goes off when you unplug
the on-board USB charger or press (On/Off) to turn the camera off.
4Sound Recording
Sound recording is enabled by defaultPress and hold for 2 seconds if you want to disable it .
5Playback Mode
Press after video recording stops to enter playback modePress ( or ) to select the video
recorded before or after and then press OK to play.
6Protection Feature
Protection feature serves to protect and lock a certain video or all videos so that they wont be
recorded over during loop recording.
7One-Key Lock
Press OK to lock the video being recorded so that it wont be recorded over during loop recording.
Press to unlock it and returns to loop recording mode.
8Browsing through files to be deleted
Turn the camera on and press (Video Recording) to stop it from recording, then press to enter
Playback ModePress (Page Up) to select the files recorded and press OK (Play) for preview
It you want a delete a certain file, press Key 4 (Menu) to enter Delete Mode when preview finishes.
Press (Page Down) to select Delete or FormatThen continue by pressing (Menu) to exit.
9.Feature Setup
Turn the camera on and stop it from recordingThen press Key 4 (Menu) to enter Setup Page
Press to select specific parameters and press OK in the end to confirm your selection
When you are done with all the settings, press Key 4 (Menu) to exit Setup page.














