= "NEW" Digital Handheld Marine Tester(DMT-10)=
: Many organisms are not equipped for high tolerances in shifts in
Temperature,Salinity and Specific Gravity for long durations without fatal consequences.
Monitoring the salt level in a reef aquarium is one of the most basic and important parameters to ensure a safe and optimal environment for tank inhabitants.
: The DMT-10 Tester is an innovative 3-in-1 tool that incorporates digital tests for temperature(°C),salinity(ppt) and specific gravity (e.g.1.024) displayed in scales commonly used by aquarists without the need for conversions.
: This revolutionary tester alllows hobbyists to receive precise,accurate, and reliable readings with the press of a button!
The only digital tester that tests for temperature, salinity, and true specific gravity
Automatic temperature compensation that calculates for salinity and specific gravity without the need for complicated conversion charts
Auto Power Off
Automatically saves the battery by switching off after 60 seconds of inactivity
Allows for measurements to be locked when taking readings in dark or awkward sump areas
Auto Calibration & Auto Temp.(°C/°F) Exchange
Included 30ppt salinity solution for easy calibrating
This device has been factory tested to provide trouble-free performance and contains certified components to ensure safe, reliable and accurate results.
Electric Conductivity Measurement System for the measuremnet of aqueous solution,being seawater and/or synthetic seawater
Temperature 0 - 100 ºC
Salinity 0ppt - 50ppt
Specific gravity 1.000 - 1.037
Temperature 0.1 ºC
Specific gravity 0.001
Temperature ± 1ºC
Salinity ± 2ppt
Specific gravity ± 0.002 S.G
Power Supply 2 x CR2032 button cell supplied
Battery life 6 months when used 3 times a day
Dimensions 30h x 30w x 195d mm
Weight Abt.61g (including battery button)
IN THE BOX
DMT-10 Tester, 2 x button cell batteries, sensor protection cap, instruction manual, one bottle 30ppt salinity standard solution
The box itself is velvet lined plastic inset with compartments for the tester,the calibration solution and the spare batteries
6 Months Warranty
Will Send Worldwide
*Digi Handheld Marine Tester(DMT-10) FAQs
Q: What exactly is a Digital Specific Gravity/Salinity Meter?
A: The DMT-10 Tester is a revolutionary 3-in-1 tool that simplifies measuring the 3 most
important parameters in a saltwater environment.
1. Salinity (ppt)
2. Specific Gravity
3. Temperature (°C or °F)
Q: Will an inexpensive floating or swing arm hydrometer be adequate?
A: There are many measuring techniques to acquire the salt level in an aquarium. Many of the inexpensive hydrometers are not accurate and fail to provide true temperature compensations. Although, these devices may be adequate to provide general guidelines, we feel obtaining precise, accurate, and reliable measurements are vital to achieving a healthy and thriving biotope.
Q: How does the Digital Handheld Marine Tester compare to a
1. The DMT-10 is in the family of conductivity meters, which are recognized as the most accurate, precise, and reliable measurement methods used in the scientific industry. Ease of use, automatic conversions, and multi-parameter testing in a single tester are the primary benefits.
a. How it Works: Salt exists as sodium and chloride ions that are positively and negatively charged moving freely in water. Once an electrical field is present, positively charged ions move toward a negatively charged electrode, and negatively charge ions move towards a positively charged electrode to obtain a reading.
b. Application: Simply dip the probe into the aquarium and press a button to receive an instant display of temperature (°C or °F), salinity (ppt), and temperature compensated specific gravity (eg.1.025)
2. Refractometer Measures the salt level by a Refractive Index.
a. How it Works: A refractometer works on the principle that the speed of light varies depending on the density of the medium that it travels through. Hence, the less dense the medium, the faster light travels. When light passes from a medium of one density to a medium of another density at an angle, the rays of light are refracted and displayed onto a scale on the refractometer.
b. Application: Add a few drops of water onto a prism located on top of the refractometer. Water must cover the entire prism and must be free of air bubbles to obtain accurate results. Turn dial until scale is focused to obtain a reading.
*Most refractomers require a light source for operation
Method Conductivity Refractive Index
Salinity Measurement Yes Yes
Temperature Measurement Yes No
Specific Gravity Measurement
(Temperature Compensated)Yes No
Easy Push Button Testing Yes No
Digital Display Yes No
Measurement Hold Feature Yes No
Instant Readings Yes No
Laboratory Grade Yes Depends on Model
Q: Salinity & Specific Gravity Are they the same?
A: Salinity and Specific Gravity are terms commonly used to measure the salt level in an aquarium. Although they are related, these two terms are quite different and should be understood for their own importance.
1. Salinity: is defined as the amount of dissolved salts contained in
2. Specific Gravity : is defined as the ratio of the density of a liquid (at a specific temperature) compared to the density of pure water (at a specific temperature)
a. It is imperative that temperature corrections are made to obtain a TRUE specific gravity reading.
* DMT-10 Testers are the only testers that auto-correct for Specific Gravity
Q: Why is temperature so important when it relates to Specific Gravity?
A: The temperature of seawater dictates the Specific Gravity measurement. As seawater is heated, it expands. And when it is cooled it contracts. As a general rule as the temperature increases the density decreases and as the temperature decreases the density increases.
Q: What is the ideal range for a saltwater aquarium?
A: Most saltwater organisms should be kept within the following parameters:
1.Temperature : 24°C∼26°C (76°F∼80°F)
2.Salinity : 28-33 ppt
3.Specific Gravity: 1.021-1.025
*Note: Guidelines may differ for individual organisms.
Q: How often do I need to calibrate?
A: We recommend recalibrating 1-2 times a month to maintain accuracy. Recalibrating frequency may vary depending on usage. Please refer to your manual for proper calibration procedures.