www.engineerthailand.com เวบไซต์สำหรับวิศวกรไทย และนักศึกษาวิศวกรรม รวบรวมความรู้ พัฒนาวิศวกรไทยสู่ความเป็นเลิศ                                                                                                                                                                                                                                          
 
 สถิติวันนี้ 2 คน
 สถิติเมื่อวาน 2085 คน
 สถิติเดือนนี้
สถิติปีนี้
สถิติทั้งหมด
15187 คน
1359831 คน
3232111 คน
เริ่มเมื่อ 2012-11-03

เครื่องวัดค่าความแข็งShore A สำหรับยาง พลาสติก หนัง 

Digital Shore A Hardness Durometer (0~100HA)

(Model: HT-5610A)

(Model: HT-5610O)

(Model: HT-5610D)

ราคาพิเศษ 3,800 บาท

สนใจติดต่อ

บริษัท เอ็นที อินโนเวชั่น จำกัด Tel. 02-8874664, 02-8870676 , Fax. 02-4960013

คุณเก๋: 087-9001168

คุณฝน Tel. 086-7959168

E-mail: ntinnovation@gmail.com

This Shore A Digital hardness durometer is used to measure the hardness of rubber and plastics according to ISO 868-1986 and ISO 7619 It has 8.1N total measure force, 1kg outside pressure, pressure needle top cone angle of 35°, 2.5mm needle length, 0~100HA dial scale and and features large LCD display for easy reading. It can be use as portable or desktop. Type A durometers is applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.

It corresponds the rigorous standards of ISO 868-1986 for Plastics and Rigid rubber and ISO 7619 Rubber in measuring indentation's hardness as well as GB/T 531.1-2008 standard. The measured hardness of a body makes possible conclusions on its characteristics e.g. about how quickly it breaks or is being scratched.

NOTE: ¹ A minimum thickness of 6mm as sample test probes is recommended for measurement's optimal results (if its less you may add more layer but should be not
****** **
more than 3 layers) and measuring point of at least 18mm distance from the outside edges.
******* ² It is recommended that measurements be made with the type D durometer when the value is above 90 HA


Special Features

  • Dial Scale is 1-100HA
  • High grade probe with 0-2.5mm Pointer journey
  • Wide measuring range with high resolution and ease of operation
  • 35º included angle with 0.5HA resolution
  • Hold Function
  • With Zero setting
  • Clear test value
  • Stress at the end of pointer: 8.1N
  • Easy to read large LCD display
  • Delivers ultra accurate reading
  • Battery operated
  • Small in the dimension, lightweigt and can easily be transported
  • Passed and conforms with ISO 868-1986 & ISO 7619 international standards
  • Comply with GB/T 531.1-2008 standard
  • With CE Marking, conforms with European health & safety requirement


Specifications

  • Resolution: 0.5HA
  • Total measure force: 8.1N
  • Outside pressure: 1kg
  • Pressure needle top cone angle of 35°
  • Needle length: 2.5mm
  • Flat cone point: φ0.79mm diameter
  • Dial Scale: 0~100HA
  • On/Off Switch

1).SHORE-A DUROMETER :It is designed for testing the hardness of soft rubber,printer roller and other elastomer material.(ASTM--D--2240)

2).SHORE-D DUROMETER:It is designed for testing the hardness of hard rubber,such as:thermoplastic plastics,bowling,plastic floor and so on.(ASTM--D--2240)

3).SHORE-O/ DUROMETER:It is designed for the hardness of soft and elasticty material,spinning trunk rotation and soft grain structure materials.(ASTM--D--2240)

II.Parameters:

 Model

 Force

Pressure 

Shape of measuring head 

 Length of Probe

Dial Scale 

 A

 8.1N

 1Kg

Top angle(35angle) 

 2.5mm

0-100mm

 D

 44.5N

 5Kg

 Top angle(30angle)

 2.5mm

 0-100mm

 O

 8.1N

1Kg

 Spheric radius2.38mm

2.5mm 

 0-100mm

 
III.Notice:
1).Thickness of test specimen >6mm,no more than 3 layers; Test area >/=feet area(diameter 18mm) 
2).Test 3 times and calculate the average as test result.
3).Usually,plz use A/D.When the hardness of A >90,plz use D or O

Set Includes

  • 1 x Digital Shore A Hardness Durometer
  • 1 x Hard carrying case with hardened foam


 


คลิ๊กนี้มีความหมาย

Copyright (c) 2011 by www.engineerthailand.com